1) Start the heat transfer machine:
First, we need to connect the heat transfer machine to the power supply and confirm that the power supply is in normal condition. Then, find the switch above the heat transfer machine and turn it on. Then, wait for a while until the heat transfer machine is fully started.
2) Install the mold:
Before officially installing the mold, you need to confirm whether the size of the mold matches the heat transfer machine to ensure that there will be no deviation in printing. Then, place the mold in a fixed position on the heat transfer machine and secure it with clips to prevent the mold from moving.
3) Place the film:
First, we need to remove the film from the packaging and be careful not to wrinkle or damage it. Then, place the film over the mold and spread it evenly from left to right, making sure the entire mold is covered.
