1. Keep the machine clean: keep the important parts of the machine clean, free from oil and dust, keep the thermal transfer film clean, free from fingerprints and dust, keep the printing products clean, free from dust and oil, and keep the hands of the processor clean , No oil stains, no sweat.

2. Hot stamping temperature: Hot stamping temperature has a significant impact on the quality of thermal transfer products. If the hot stamping temperature is too high, the substrate may be damaged. If the hot stamping temperature is too low, normal transfer may not be achieved. The ironing temperature should be determined by factors such as the substrate, the flower film, and the heat transfer machine. Different materials have different ironing temperatures.

3. Hot stamping pressure: The hot stamping pressure must be adjusted to the most appropriate, otherwise it is easy to damage the rubber head and the object to be hot, and if it is too small, it will affect the hot stamping effect. After adjusting to the hot stamping pressure, the pressure should be adjusted and locked to avoid changes in mass production.

4. Hot stamping speed: The hot stamping time (speed) should be determined according to the specific hot stamping material. In the case of ensuring the hot stamping effect, the faster the speed, the higher the production efficiency, but some products are limited by some special conditions. Use slow hot stamping.