The silicone roller is made of silicone material. Its use makes up for the performance defects of other materials, especially in terms of high temperature resistance. In order to make the performance of the rubber roller more stable, we need to use it Follow the following guidelines:
1. Before starting up and running, check the silicone roller for abnormal conditions, and start working after confirming that it can operate normally. When shutting down, pay attention to check whether the residual temperature setting delay is normal. Remember not to shut down and stop directly. The temperature delay is set at about forty to fifty minutes.

2. The rubber roller can be locked and fixed after heating to the required temperature, but the strength should be moderate, and not too strong or too tight.

3. If you encounter a sudden power failure during work, you should remove the rubber roller while turning it while wearing gloves, and place it in a ventilated and cool place to dissipate heat, so as not to cause the rubber roller to be partially or wholly due to uneven heating. Was burned out.

In our daily work, we should use the silicone roller correctly according to the above guidelines. When it is turned off and not in use, use a cloth strip dipped in industrial alcohol to remove the sundries on the surface of the fruit transfer film to ensure its surface is clean.