Before printing:

1. 

After received goods,please double check the heat transfer film for wrinkles, stains, ink peeling-off,etc.,If the above situation exists, please stop using it, take photos and videos for us<note: production time ,problem quantity ,model.

2

1:Please make sure the application product surface is clean,smooth

2:Please make sure that the product material matches the film material 

3:Please ensure that the silicone surface is intact,

3.

1:Please ensure that the silicone, product and film are in the same position on the same horizontal line. The silicone must cover all the printing area 

2:Please make sure the hot stamping temperature is between 220-240 degrees

3: PS: for PE material :Please make sure the flame treatment 

covers all printing areas,and before printing , it must be treated by flame at about 50-80 degrees

In the printing:

​If during the printing process, you find that 1 or 2 or 3 pieces products have wrinkles, stains, ink peeling, etc.please pull the problem heat transfer film passed ,and contunite to use the good heat transfer film