The hot stamping plate is commonly known as the hot stamping plate or the electric engraving plate, and the zinc plate (with zinc as the plate) and the magnesium plate are generally used. Below, I will tell you about the classification of the bronzing version.
In addition, according to the different types of substrates, it can be divided into paper bronzing, fabric bronzing, leather bronzing and plastic bronzing.
Zinc plate, the most common and most used hot stamping plate, has a fixed thickness and low production cost. It is suitable for hot stamping in 1000-3000 sheets.
Magnesium plate, there are various thicknesses, thicker ones can corrode deeper, used for ironing thick cardboard, cloth pattern or three-dimensional ironing, so the effect will be better. In addition, the edge of the paper used for hot stamping is clearer and more durable than the zinc plate, and there is no need to change the plate when the number of hot stamping is large.
The copper alloy hot stamping version has higher strength than zinc and magnesium, better image level reduction effect, high definition, and the number of hot stamping can reach more than 100,000.
The above three kinds of plates are suitable for single-layer bronzing
Brass plate, with a thickness of about 7MM, has low hardness and high engraving ability. It is suitable for hand engraving or motor engraving. It is regarded as an engraving plate with clear layers. It is a must for multi-layer and special bevel engraving. Convex, emboss, emboss, three-dimensional relief, three-dimensional bronzing, etc., but the workmanship is more complicated and the cost is higher.
Post time: Jul-19-2022