FREE SHIPPING ON ALL BUSHNELL PRODUCTS
SEARCH
News
-
What Are In-Mold Labels?
What Are In-Mold Labels? In-mold labeling (IML) is a labeling method in which a pre-printed film is applied to a mold before the plastic container. Plastic pellets or resin are then heated and placed into the mold where it merges with the label to create ...Read more -
About The Heat Transfer Film Description
The description of Heat transfer film The heat transfer film decoration process is a process of heating the thermal transfer film at one time to transfer the decorative pattern on the thermal transfer onto the surface of the building material to be decorated to form a h...Read more -
Heat Transfer Film Operating Instruction
Heat Transfer Film Operating Instruction Before printing: 1. After received goods,please double check the heat transfer film for wrinkles, stains, ink peeling-off,etc.,If the above situation exists, please stop using it, take photos and videos for us<note: product...Read more -
Endless Possibilities Of in Mold Label
Endless possibilities A wide choice of finishes and decorative effects: matt, gloss, orange peel, metallic pain, microperforated, double sided printing, and many more. Labels can adapt to different heat treatments: High pressure, pasteurisation, autoclave and retorting...Read more -
Six factors need to be paid attention to in order to achieve the ideal hot stamping effect
The hot stamping process is loved by people because of its unique surface decoration effect. From the basic process of hot stamping, it can be seen that in order to obtain the ideal hot stamping effect, it is necessary to reasonably grasp the process parameters such as h...Read more -
The production process of the hot stamping silicone plate
Bronzing stencils, commonly known as bronzing plates or electro-engraving plates, mostly use zinc plates (zinc as the plate) and magnesium plates. Zinc plate, the most common and most used hot stamping plate, has a fixed thickness and low production cost. It is suitable ...Read more -
Material characteristics of pet heat transfer film
Material characteristics of pet heat transfer film: ①It has good mechanical properties, impact strength is 3~5 times that of other films, and good folding resistance. ②It is resistant to oil, fat, dilute acid, dilute alkali, and most solvents. ③It has excellent resis...Read more -
How to improve the quality of bronzing process
At present, due to the continuous development of science and technology, the post-press finishing process is constantly innovating, and various new processes such as holographic positioning hot stamping and cold hot stamping have emerged. However, traditional ho...Read more -
About The Difference Between In Mould Label (IML) And Heat Transfer Film (HTF)
1. First, distinguish from the process IML, put the film into the mold. After injection molding, the film and the product are integrated. During the molding process, the products are produced and decorated in one step In addition,It can decorates all the edges o...Read more -
Causes and solutions of inaccurate bronzing overprinting of hot stamping plate
Customer asked: What is the reason for the inaccuracy of bronzing hot stamping overprinting? How to solve it? DECAI Answers: 1. The paper is deformed. Solution: Reduce the drying temperature or UV curing ...Read more -
Application area of in mold label
In-mold labeling is mainly used for blow molding and injection molding products of PP, PE, PET and other materials. That is, before blowing and injection molding, put the printed in-mold paste into the blowing and injection molding cavity. When the mold is closed for b...Read more -
The control of the hot stamping process of the silicone plate
Traditional anodized aluminum uses copper and zinc bronzing plates. This bronzing plate has higher requirements on the flatness of the bronzing surface, otherwise there will be problems of poor adhesion or even incomplete pictures and texts. The traditional hot ...Read more