1) Start the heat transfer machine:

First, we need to connect the heat transfer machine to the power supply and confirm that the power supply is in normal condition. Then, find the switch above the heat transfer machine and turn it on. Then, wait for a while until the heat transfer machine is fully started.

2) Install the mold:

Before officially installing the mold, you need to confirm whether the size of the mold matches the heat transfer machine to ensure that there will be no deviation in printing. Then, place the mold in a fixed position on the heat transfer machine and secure it with clips to prevent the mold from moving.

3) Place the film:

First, we need to remove the film from the packaging and be careful not to wrinkle or damage it. Then, place the film over the mold and spread it evenly from left to right, making sure the entire mold is covered.

*Please refer to the video operation

2. How many products can be printed per hour?

 For example, cups: 500pcs per hour; 20L buckets: 200pcs per hour

Influencing factors: product printing area and worker proficiency

3. How much power is it?

Power: Straight machine: 2000W, Conical machine, 3500W;

Current:Straight machine:2000W/220V=9A;Conical machine, 3500W/220V=16A;

Voltage: 220V, frequency 50HZ,

4. How to adjust air pressure and stretching?

There is an air pressure valve and a stretch button.

5. Does the machine require an air compressor? How big of an air compressor is needed?

An air compressor is required. You can use the air compressor of the injection molding machine together, or you can purchase a small air compressor separately.

6. How to make molds and rubber rollers for products of different specifications?

They must all be made according to their respective sizes.

7. How to quote the mold fee?

Below 5L: USD 80/piece, 20L barrel: USD 220/piece.

8. What is the biggest difference between Straight machine machine and Conical machine?

 To explain using straight film and curved film, the curved machine is more accurate.