General faults and troubleshooting methods in the operation of the hulling rubber roller on the machine
The method of removing the cause of the fault
（1）The rubber roller is stuck
1. If the blanking is uneven, adjust whether the accelerating plate is smooth and whether the blanking is stuck by impurities.
2. The raw materials contain too much impurities. 2. Strengthen the cleaning and removal of impurities and the maintenance and management of equipment.
3. The blanking material directly impacts.
3. Adjusts the angle of the accelerated flow plate. 4. Wear-resistant debris has been mixed into the second roller shaft (not easy to detect)
4. Open the machine compartment and check it every shift, clean up or enlarge the rolling distance to let it flow out.
5. The rice hulling is on one side 5. Adjust the feeding of the rice hulling evenly.
（2）Rubber roller size head
1. The axis of the two rollers is not parallel, and the shaft seat is adjusted slightly until the axis of the rubber roller is parallel.
2. The flow rate of the feed plate is more on one side and the other is less.
3. The rolling distance is large on one side and small on the other 3. Adjust the wheelbase to keep the axis parallel.
4. Return the rice hulling to one side. 4. Adjust the hulling rubber rollers to keep parallel and keep the rice feeding evenly.
5. Uneven weight at both ends;
5. Adjust the pressure until the weight is equal
6. Eliminate plate deviation, adjust the angle of elimination plate
Post time: Jun-24-2021