price rubber rollers laminator Silicone Rubber Roller
Silicone Rubber Laminating Machine Rubber Roller
Silicone rubber roller are the ideal choice for peripheral decorating of cylindrical shapes and roll on decorating of large flat or curved surfaces. Silicone conforms readily to surface variations in molded plastic parts, ensuring smooth application of hot stamp foils and multi-color heat transfers. Silicone rubber roller are used in a variety of application including banding, laminating, printing and decorating.
Lamination is commonly known as over-gluing. Whether it is cold lamination or hot lamination, rubber rollers are needed to assist. If the rubber rollers of the laminating machine are not cleaned and maintained well, dust or hair is stuck, and it is easy to appear sand, stripes, and worms. The phenomenon of bulging and emptiness of the film in the shape of a moiré or moiré is also known as "bubbling". Therefore, in addition to maintaining a certain temperature and humidity in the working environment, the impact of dust on the machine should also be reduced.
Therefore, after using the laminating machine, pay attention to cleaning. The rubber roller should be wiped clean. You can use a sticky note, a clean cloth towel dipped in distilled water or alcohol to wipe, it does not need to be too large, and then it can be dried in the air. Be careful not to use washing powder, gasoline, etc. Detergents such as cleaners, because the rubber rollers of the cold laminating machine are mostly made of polyurethane. If it is idle for a long time, it is recommended to disassemble the rubber roller and wrap it to prevent extrusion deformation.
The laminating machine is a special equipment for paper, board and laminating. It is pressed together by a rubber roller and a heating roller to form a paper-plastic product. How should the rubber roller of the laminator be maintained? The details are as follows:
1. When cleaning the rubber roller, it must be cleaned carefully, otherwise, the surface layer of the rubber roller and the pigment and resin will be oxidized to form a smooth and hard film, which will cause the surface to vitrify and affect the ink transfer. If it is not cleaned frequently, the surface of the rubber roller of the laminating machine will be uneven and not easy to use. Therefore, the rubber roller should be washed and put away for spare when the machine is shut down.
2. The rubber roller of the laminating machine has been used for a long time and is aging, coupled with the corrosion of chemicals, resulting in rotten glue and "slag". It is best not to use such a rubber roller, otherwise it will seriously affect the quality of printed products.
3. In order to ensure that the production and printing quality are not affected, it is necessary to have spare ink rollers, but do not store too much to avoid aging. The storage environment of the rubber roller is the same as that of the blanket. In addition, the rubber roller should be straight and straight at the journal, and the surfaces should not touch each other or other objects to avoid deformation of the rubber roller.
4. The rubber roller of the laminating machine should not be stored near large motors and generators. Due to the large amount of ozone generated by these devices, the surface of the rubber roller will age and crack.
5. When the weather is severe and cold, the ink is uneven, and auxiliary materials can be appropriately added to the ink. It is forbidden to use infrared heaters and other equipment to bake the ink rubber roller to prevent the rubber roller from being oxidized.
